陵水17-2气田开发工程项目外输系统招标公告
投标邀请
项目名称:陵水17-2气田开发工程项目外输系统
招标编号:****
发标日期:2018年7月19日
1. ********中心和中化建****公司(以下简称:招标代理机构)受****(以下简称:招标人)委托,现邀请投标人对下列货物和服务提交密封投标:
资金到位或资金来源落实情况:已落实
项目已具备招标条件的说明:已具备
是否接受联合体投标:不接受
货物名称:外输系统
数量:1套
主要技术参数:
1)外输软管必须满足以下要求:
描述 | 要求 |
名义内径 | 12” |
结构类型 | single carcass |
压力 | 15barg |
总长 | 220m |
2)设备的重量和尺寸不能超过下表规定:
设备 | 长 | 宽 | 高 | 干重 |
软管绞车 | 9.6m | 9.7m | 10m | 62MT |
大缆绞车 | 7m | 4.5m | 4.6m | 19MT |
液压动力 | 2.5m | 3.5m | -- | 5MT |
3)软管绞车转速不低于0.3m/s。
交货期/交货地点:
国内交货:2019年11月3日前交货至**省**市陵水17-2气田开发工程项目建造现场
国外交货:2019年11月3日前交货至中国**省**港
2.资格标准:
1) 投标人为陵水17-2半潜平台提供的外输系统必须是制造商的成熟产品,买方不接受未经使用的新试制品。提供外输系统的厂家在近十年内至少有2套在浮式生产装置上的业绩,****工厂提供过能存放12寸及以上的软管绞车。投标人须提交有效的业绩表和相关证明文件能够证明上文提到的要求,至少包括:合同复印件相关章节和用户现场调试报告。
2) 外输系统为入级系统,需要取得CCS或ABS船级社的产品证书。
3)外输系统中的主要部件或设备(如:液压泵,液压马达,电机,外输软管,系泊大缆,滑环,应急释放连接器,末端****工厂生产,并提供产地证明。买方不接受贴牌产品。
4) 本次招标只接受生产厂家投标。
3. 有兴趣的合格投标人可通过以下方式获取招标文件:
从2018年7月19日开始至2018年7月30日止,在中国海油采办业务管理与交易系统(https://buy.****.cn/cbjyweb/)购买招标文件(电子版)。投标人须在线填写购买招标文件登记表,并在线支付标书款至指定账户。在线支付成功后,投标人可自行下载招标文件。招标文件每套售价为2000元人民币或300美元(收款人:中化建****公司,美元开户行:****分行**里支行,美元账号:110********6300007037,SWIFTCODE:COMMCNSHBJG),售后不退。
4. 投标文件递交截止时间和地点:所有投标文件都应附有按规定提交的投标保证金,并于2018年8月14日上午10:30时(**时间)前递交至**市东**东直门外小街6号海油大厦3层308室。
5. 开标时间:定于2018年8月14日上午10:30时(**时间)开标。届时请参加投标的代表出席开标仪式。 开标地点:**市东**东直门外小街6号海油大厦3层308室。
6. 本次招标公告同时在中国国际招标网(www.****.com)上发布。
招标人:****
地址:**省**市**区南油二区**楼
邮政编码:524057
联系人:覃兰英
电话:+86-759-****700
邮箱:qinly@cnooc.****.cn
招标代理机构:********中心和中化建****公司
地址:**市东**东直门外小街6号海油大厦4层
邮编:100027
联系人:陈偲聪
联系电话:86-10-****5975
Invitation for Bids (IFB)
Project: Offloading System for Lingshui 17-2 Gas Field Development Project
Bid No: ****
Date: July 19th, 2018
1. China National Offshore Oil Corp. Procurement Department Procurement Tendering Centre and CNCCC International Tendering Co., Ltd. (hereinafter called “Tendering Agent”), for and on behalf of CNOOC China Limited-Zhanjiang (hereinafter called "Purchaser") invites sealed bids from eligible bidders for the supply of following equipment:
Source of Funds:yes
Description of The Prepared Bidding Conditions:yes
Joint Bids:NOT Acceptable
Name of Goods: Offloading System
Quantity: 1 set
Technical parameters:
1) The offloading hose should be meet below requirements:
Description | Requirement |
Hose nominal bore diameter | 12” |
Hose carcass construction type | single carcass |
Hose pressure rating | 15barg |
Overall length | 220m |
2) The weight and size of equipment to be controlled strictly within below requirement
Equipment | Length | width | Height | Dry Weight |
Hose Reel | 9.6m | 9.7m | 10m | 62MT |
Hawser Reel | 7m | 4.5m | 4.6m | 19MT |
HPU | 2.5m | 3.5m | -- | 5MT |
3) Hose reel speed not less than 0.3m/s.
Delivery Schedule:
From within PRC: All of goods delivered to Construction Site of Qingdao, Shandong, P.R.China on or before November 3rd, 2019.
From outside PRC: All of goods shall be delivered to Qingdao Port, Shandong Province, China on or before November 3rd, 2019.
2. Qualification Requirements:
1) The Offloading system Supplier selected for the LS17-2 SEMI platform should be manufacturer proven products, unused prototype equipment shall not be acceptable. The manufacturer to provide offloading system should be at least have 2 sets systems in FPU finished in 10 years. And had ever supplied hose reel which fit 12” or larger hose. The Bidder shall submit valid track records and relevant documentary evidence to prove the requirements mentioned above, including at least: relevant chapter’s copies of contract and commissioning report on user site.
2) The System shall have certificate of marine product issued by China Classification Society (CCS) or American Bureau of Shipping (ABS).
3) The main components or equipment of system (i.e. hydraulic pump, hydraulic motor, electrical motor, offloading hose, hawser, swivel, coupling, end valve etc.) Should be produced in its brand own manufacturer and provide certificate of origin, the Purchaser does not accept OEM product.
4) This bid only accept manufacturer or producer as bidder.
3. All those who are willing to participate in the bids are kindly requested to: enter into website https://buy.****.cn/cbjyweb/to purchase the bidding documents (electronic edition) on line from July 19, 2018 to July 30, 2018 upon non-refundable payment of RMB 2,000 or USD300 for each copy. (Beneficiary: CNCCC International Tendering Co., Ltd., Name of Bank: Bank of Communications Beijing Branch Hepingli Sub-branch; USD A/C No.: 110********6300007037,SWIFT Code: COMMCNSHBJG). After completion of the remittance, the bidder could download the bidding documents.
4. Bids must be delivered to Room 308, 3rd. Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing 100027, P.R. China for submission of bids before 10:30 a.m. (Beijing time) on August 14, 2018.
5. Bids will be opened in the presence of bidders' representatives who choose to attend at 10:30 a.m. (Beijing time) on August 14, 2018 at Room 308, 3rd. Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing 100027, P.R. China for bid-opening.
6. The Invitation for Bids is issued on the website of www.****.com simultaneously.
Name of Purchaser: CNOOC China Limited-Zhanjiang
Address: Cooperation Building, 2nd Distrct of Nanyou, Potou District, Zhanijang, Guangdong Province, P.R. China, 524057
Contact Person: Miss Qin Lanying
Telephone: +86-759-****700
E-mail: qinly@cnooc.****.cn
Name of Tendering Agent: China National Offshore Oil Corp. Procurement Department Procurement Tendering Centre and CNCCC International Tendering Co., Ltd.
Detailed Address: Floor 4,CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing 100027, P.R. China
Post Code: 100027
Contact person: Chen sicong
Telephone: +86-10-****5975
E-mail: chensc2@cnooc.****.cn