物品名称 规格型号 数量 单位 描述
| 三角带 | A864 | 6.00 | 根 | {"规格":"A864","带类型":"V型","材质":"天然橡胶+包布织物（氯丁二烯棉、聚酯纤维织物）+聚酯线绳","参照标准":"GB/T 1171-2017"} |
| 三角带 | B3200 | 56.00 | 条 | {"规格":"B3200","带类型":"B","材质":"由胶帆布、顶胶、缓冲胶、芯绳、底胶组成","宽度":"顶宽17mm","厚度":"11mm","特殊要求":"顶宽17mm；高度11mm；楔角40°；基准长度极限偏差+44mm、-22mm；中心距变化量≤2.0mm；拉伸强度≥5.0KN；外观质量：型号标示清晰，手握住三角带松开时手感不粘无龟裂现象。","使用寿命":"≥4个月","参照标准":"GB/T4489-2002、GB/T1171-2006、GB/T11544-2012"} |
| 三角带 | B1956 | 20.00 | 条 | {"规格":"B1956","带类型":"B","材质":"橡胶NR、包布、芯绳"} |
| 三角带 | Z1050 | 6.00 | 条 | {"规格":"Z1050","带类型":"Z型","材质":"伸张层、缓冲层、压缩层材质：氯丁橡胶；包布层：氯丁二烯棉、聚酯纤维织物；强力层：聚酯线绳","宽度":"10mm","厚度":"6mm","节线长度":"1050mm","特殊要求":"若不符合技术要求或质量问题，则退换货，产生的所有费用由供货商承担。","使用寿命":"120天","参照标准":"GB/T 1171-2017","备注":"根据公司要求完善该物资技术要求。"} |
| 三角带 | C114 | 20.00 | 条 | {"规格":"C114","带类型":"C","材质":"氯丁橡胶+聚酯纤维织物","宽度":"22mm","厚度":"14mm","节线长度":"2896mm","特殊要求":"到货质量与技术要求不符,做退换货处理","使用寿命":"365天","参照标准":"GB/T 12730-2018","备注":"最少轮径120mm"} |
| 三角带 | 宽度":"17mm","厚度":"11m | 20.00 | 条 | {"宽度":"17mm","厚度":"11mm","材质":"天然橡胶\\包布织物\\聚酯线绳","特殊要求":"B1499,不得有胶布破损\\鼓泡\\带身压扁","参照标准":"GB/T 11544-2012"} |
| 三角带 | 4095 | 50.00 | 根 | {"规格":"4095","带类型":"SPC","材质":"橡胶、帆布、芯绳","参照标准":"GB/T1171-2017"} |
| 三角带 | A1200 | 30.00 | 条 | {"规格":"A1200","带类型":"A","材质":"伸张层、缓冲层、压缩层材质：氯丁橡胶；包布层：氯丁二烯棉、聚酯纤维织物；强力层：聚酯线绳；","使用寿命":"≥3个月","参照标准":"GB/T11544-2012"} |
| 三角带 | 8V3556 | 100.00 | 条 | {"规格":"8V3556","带类型":"V型","材质":"伸张层,压缩层:氯丁橡胶,包布层:聚酯纤维,强力层:聚酯线绳","宽度":"25mm","厚度":"23mm","使用寿命":">90天"} |
| 压片机PU带 | 5370*1000*1.4 | 15.00 | 条 | {"规格型号":"5370*1000*1.4","材质":"PU","宽度":"1000mm","厚度":"1.4mm","长度":"周5370mm","拉伸度":"2mm","工作温度":"40℃","阻燃":"是","内衬材料":"聚酯纤维布","层数":"4层","导向条尺寸":"底宽12mm*高8mm*上宽6mm","传动辊直径":"130mm","特殊要求":"抗拉强度高，打弯性能好耐磨损，材质耐温-20/+ 80度 .使用寿命不低于180天.","参照标准":"QB/T 5351-2018","备注":"PU带左右两边都有导向条，导向条底边与PU带边沿距离为10mm，PU带周长5370mm，宽1000mm，PU带无缝接驳部位为齿形交叉硫化热接，如与技术要求不符，则退换货处理，产生的费用由供货商承担。"} |
| 同步带 | HTD2720-8M-30mm | 20.00 | 条 | {"规格":"HTD2720-8M-30mm","带类型":"环形无接缝齿形带","材质":"氯丁橡胶带身,玻璃纤维涨紧层，齿面尼龙布","宽度":"30±2%mm","厚度":"6±2%mm","节线长度":"2720±2%mm","特殊要求":"齿形HTD/节距8mm/齿高3.4mm","使用寿命":"≥180天","参照标准":"GB/T 13487-2017","备注":"到货验收标准:1.包装完好,内部备件无破碎,损坏.2.型号,参数,等必须符合技术要求，附带产品合格证.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."} |
| 传送带 | 4330*250*3 | 2.00 | 条 | {"规格型号":"4330*250*3","材质":"pvc或聚氯乙烯+聚酯织物","宽度":"250mm","厚度":"3mm","长度":"4330mm","拉伸度":"0.3~0.5mm","工作温度":"-20~80℃","阻燃":"是","内衬材料":"聚酯织物","层数":"2层","导向条尺寸":"无","传动辊直径":"89mm","特殊要求":"产品结构为二布二胶无缝接驳,使用寿命大于一年，传送带颜色为深绿色","参照标准":"GB/T 7984-2013","备注":"要求：表面防滑具有良好的抗压耐磨性。一体成型无缝接驳。到货产品必须附带出厂材质证明，产品合格证，检测报告以便于进行到货验收的依据。到货产品与技术要求不符或存在缺陷，供货商无条件给予更换或退货，退换货产生的一切费用由供货商自行承担。"} |
| 垂直提升机传送带 | 10850*150*10 | 1.00 | 条 | {"规格型号":"10850*150*10","材质":"PVC","宽度":"150mm","厚度":"10mm","长度":"10850mm","拉伸度":"2mm","工作温度":"-10~80℃","阻燃":"是","内衬材料":"聚酯帆布","层数":"10层","导向条尺寸":"无","传动辊直径":"300mm","特殊要求":"环形无接头","参照标准":"GB/T 7984-2013","备注":"5布5胶绿色传送带，厚度偏差±1mm、硬度73-88（shorea）。表面验修要求：表面无气泡，起皮，无毛刺起层现象，带体耐冲击、抗撕裂、抗磨耗。到货必需带出厂证明和产品合格证。到货产品于技术要求不符，厂家必需无条件退换货。使用寿命大于等于1年。"} |
| 传送带 | 32650*80*3 | 5.00 | 条 | {"规格型号":"32650*80*3","材质":"耐磨橡胶尼龙片基","宽度":"80mm","厚度":"3mm","长度":"32650mm","内衬材料":"尼龙片基"} |
| 传送带 | 30600*80*3 | 5.00 | 条 | {"规格型号":"30600*80*3","材质":"耐磨橡胶尼龙片基","宽度":"80mm","厚度":"3mm","长度":"30600mm","内衬材料":"尼龙片基"} |
| 传输带 | 14M*6764*115/600℃ | 30.00 | 条 | {"规格":"14M*6764*115/600℃","带类型":"重型级高温毛毡传输带","材质":"1PU + 面层PBO高温毛毡（4+6/600度），底带TPV","宽度":"113----115mm","厚度":"10±1mm","节线长度":"6764mm","特殊要求":"带有软细钢丝","使用寿命":"60天","参照标准":"GB/T 13487-2017","备注":"齿距：14mm\n齿高度：6mm\n齿型：HTD 圆弧齿\n毛毡耐热温度：600℃"} |
| 高温同步带 | 高温500度，米色 | 10.00 | 个 | {"型号及色号":"高温500度，米色","宽度":"80mm","厚度":"10mm","材质":"杜邦纤维针刺，高温树脂","参照标准":"FZ/T 25001-1992"} |
| 多楔带 | PL2325-16 | 5.00 | 条 | {"规格":"PL2325-16","带类型":"PL","楔数":"16","楔距":"4.7","使用寿命":"90天","参照标准":"GB/T 3686-2014","备注":"材质：橡胶，抗拉体材料为高强度聚酯绳线,楔角40°,无裂纹，无开胶，高强度，外观要完整，适用设备20MN中间锯，到货附带合格证，如到货与技术要求不符,无条件做退换货处理,由此产生的一切费用由供方承担"} |
| 带齿耐高温同步带 | 10*2292*49 | 15.00 | 条 | {"型号及色号":"10*2292*49","宽度":"49mm","厚度":"10mm","材质":"杜邦纤维针刺,高温树脂","参照标准":"GB/T 13487-2017","备注":"齿形:梯形齿,参数尺寸:带宽:49mm;带长:2292mm;带厚:10mm;齿节距:12mm;齿顶厚:4mm;齿根厚:5mm;齿高:3mm;纤维层厚:7mm.耐热温度:500℃.使用场合:挤压铝合金使用的耐高温同步带.使用寿命:正常情况下使用3个月以上.验收要求:如所送的物品规格尺寸,材质达不到以上技术要求,生产厂家必须无条件退货,并再次送货,合格为止."} |
| 同步带贴中温毛毡 | 14M-10250-65 | 8.00 | 条 | {"规格":"14M-10250-65","带类型":"齿形带","材质":"凯夫拉+PU同步带","厚度":"10mm","特殊要求":"PU同步带与毛毡热熔一体粘合","使用寿命":"≥180天"} |
| 多契带 | 16-1915 | 2.00 | 条 | {"规格":"16-1915","带类型":"多契带","材质":"伸张层压缩层:氯丁橡胶,包布层:聚酯纤维","宽度":"75mm","厚度":"7mm","节线长度":"1915mm","特殊要求":"齿数16","使用寿命":"365天","参照标准":"GB/T 13487-2017"} |
| 高温同步带 | 2614*80*10 | 60.00 | 条 | {"型号及色号":"2614*80*10","宽度":"80mm","厚度":"10mm","材质":"杜邦纤维针刺，高温树脂等","参照标准":"无"} |
| 齿形带 | HTD 1160-M5 | 10.00 | 条 | {"规格":"HTD 1160-M5","带类型":"齿型","材质":"氯丁橡胶内含聚酯线芯，齿面用尼龙高弹力布保护","宽度":"26±1mmmm","厚度":"4±0.5mmmm","节线长度":"1160±1mmmm","特殊要求":"齿距5毫米，齿高：2.05±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥60天天","参照标准":"GB/T 13487-2017","备注":"货验收:到货皮带表皮无破损、刮丝等情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 齿形带 | HTD 550-5M | 30.00 | 条 | {"规格":"HTD 550-5M","带类型":"齿型","材质":"氯丁橡胶内含聚酯线芯，齿面用尼龙高弹力布保护","宽度":"26±1mmmm","厚度":"4±0.5mmmm","节线长度":"550±1mmmm","特殊要求":"齿距5毫米，齿高：2.05±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥60天天","参照标准":"GB/T 13487-2017","备注":"货验收:到货皮带表皮无破损、刮丝等情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 环形草坪纹工业皮带 | 4*200*5030 | 5.00 | 条 | {"规格型号":"4*200*5030","材质":"PVC","宽度":"200mm","厚度":"4mm","长度":"5030mm","拉伸度":"0mm","工作温度":"30℃","阻燃":"阻燃","内衬材料":"聚酯织物","层数":"4层","导向条尺寸":"0","传动辊直径":"0","特殊要求":"无","参照标准":"GB/T 32331-2015","备注":"用于光伏自动线材料传输，细纹路，厚度加凸点尺寸不超5mm，两胶两布，防滑、抗磨、耐油、耐低温。草坪纹绿色。到货产品如与技术要求不符实行退换货处理，由此产生的费用由厂家承担。"} |
| 圆弧齿同步带 | S14M1778-80 | 10.00 | 条 | {"规格":"S14M1778-80","带类型":"圆弧齿","材质":"氯丁橡胶（橡胶内含钢丝）","宽度":"80±0.1mmmm","厚度":"10.2±0.5mmmm","节线长度":"1778±2mmmm","特殊要求":"齿距14mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥60天天","参照标准":"GB/T 13487-2017","备注":"货验收:到货皮带表皮无破损、刮丝等情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 同步带 | AT10 6550*80*10 | 8.00 | 条 | {"规格":"AT10 6550*80*10","带类型":"AT型齿","材质":"内层：氯丁橡胶+聚酯线绳，外层：氟橡胶（一次成型）","宽度":"80±1mmmm","厚度":"10±0.5mmmm","节线长度":"6550±5mmmm","特殊要求":"齿距10毫米，齿高：2.5±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥180天天","参照标准":"GB/T 37203-2018","备注":"齿底有耐磨尼龙帆布绳芯，内层：氯丁橡胶+聚酯线绳5mm±0.2mm，外层：氟橡胶5mm±0.3mm带中导条10*6mm±0.2，工作温度：≥280℃，货验收:到货皮带无破损情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 同步带 | AT10 1180*80*10 | 12.00 | 条 | {"规格":"AT10 1180*80*10","带类型":"AT型齿","材质":"内层：氯丁橡胶+聚酯线绳，外层：氟橡胶（一次成型）","宽度":"80±1mmmm","厚度":"10±0.5mmmm","节线长度":"1180±5mmmm","特殊要求":"齿距10毫米，齿高：2.5±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥180天天","参照标准":"GB/T 37203-2018","备注":"齿底有耐磨尼龙帆布绳芯，内层：氯丁橡胶+聚酯线绳5mm±0.2mm，外层：氟橡胶5mm±0.3mm带中导条10*6mm±0.2，工作温度：≥280℃，货验收:到货皮带无破损情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 同步带 | AT10 5200*80*10 | 12.00 | 条 | {"规格":"AT10 5200*80*10","带类型":"AT型齿","材质":"内层：氯丁橡胶+聚酯线绳，外层：氟橡胶（一次成型）","宽度":"80±1mmmm","厚度":"10±0.5mmmm","节线长度":"5200±5mmmm","特殊要求":"齿距10毫米，齿高：2.5±0.05mm","使用寿命":"(该备件为易损件,根据现场使用情况)≥180天天","参照标准":"GB/T 37203-2018","备注":"齿底有耐磨尼龙帆布绳芯，内层：氯丁橡胶+聚酯线绳5mm±0.2mm，外层：氟橡胶5mm±0.3mm带中导条10*6mm±0.2，工作温度：≥280℃，货验收:到货皮带无破损情况,表面无橡胶老化的问题,到货提供相关合格证明,相关尺寸参数必须满足技术要求,若不符合要求,厂家予以退换货处理,产生费用由供货商承担."} |
| 垂直提升机传送带 | 12700*200*10 | 2.00 | 条 | {"规格型号":"12700*200*10","材质":"PVC","宽度":"200mm","厚度":"10mm","长度":"12700mm","拉伸度":"2mm","工作温度":"-10-90℃","阻燃":"是","内衬材料":"聚酯帆布","层数":"10层","导向条尺寸":"无","传动辊直径":"300mm","特殊要求":"环形无接头","参照标准":"GB/T 7984-2013","备注":"5布5胶绿色传送带，厚度偏差±1mm、长度偏差±5mm，硬度73-88（shorea）。表面验修要求：表面无气泡，起皮，无毛刺起层现象，带体耐冲击、抗撕裂、抗磨耗。到货必需带出厂证明和产品合格证。到货产品于技术要求不符，厂家必需无条件退换货，产生的费用有供应商承担。使用寿命≥1年。"} |
| 圆弧齿中温毛毡同步带 | 1220*60*9.5白色 | 12.00 | 条 | {"型号及色号":"1220*60*9.5白色","宽度":"60mm","厚度":"带厚9.5；中心导向齿厚2.3；总厚度11.8mm","材质":"聚氨酯+中温毛毡","参照标准":"GB/T 13487-2017","备注":"要求：同步带环形长度为1220mm。一体成型无缝接驳，使用寿命大于一年。到货产品必须附带出厂材质证明，产品合格证，检测报告以便于进行到货验收的依据。到货产品与技术要求不符或存在缺陷，供货商无条件给予更换或退货。退换货所产生的费用由供货商承担。"} |
| 高温毛毡筒 | 100*10*1100/600℃ | 20.00 | 个 | {"型号及色号":"100*10*1100/600℃","宽度":"100mm","厚度":"10mm","材质":"毛毡","参照标准":"FZ/T 25001-2012","备注":"使用寿命：1年；如出现于技术要求不符状况，供应商无条件退货或更换，费用由供应商负担。"} |
| 同步带 | 540L-075 | 20.00 | 条 | {"规格":"540L-075","带类型":"环型无接缝同步带","材质":"氯丁橡胶+绳芯","宽度":"19.10mm","厚度":"3.5mm","节线长度":"1371.60mm","特殊要求":"尺寸误差允许±0.5mm，节距：9.525mm，齿数：144齿，1、如配件到货质量与技术要求不符，退换货产生的费用由供货方承担。 2、因****公司经****公司相关规定进行处罚。","使用寿命":"180天","参照标准":"GB/T 11616-2013"} |
换一批
换一批