标段（包）编号

****

发标日期

2024年11月28日

主要技术规格

1)**3-1CEP平台 20”HIPPS 系统：所用逻辑控制器形式为固态或可编程，关断阀尺寸为20”，压力磅级为1500LB，密封形式为硬密封，主体材质为双相钢，整体安全完整性等级（SIL）不低于 SIL3。2)海油石油119 FPSO 6”HIPPS 系统：所用逻辑控制器形式为固态或可编程，关断阀尺寸为6”，压力磅级为1500LB，密封形式为硬密封，主体材质为双相钢，整体安全完整性等级（SIL）不低于 SIL3。1)20” HIPPS for LW3-1 CEP：The logic controller used is a solid-state or PLC logic controller, with a shut down valve size of 20", a pressure rating of 1500LB, the valve sealing form is a hard seal, and the valve body material is duplex stainless steel, HIPPS safety integrity level (SIL) is required to no less then SIL3.2)6” HIPPS for HYSY119 FPSO: The logic controller used is a solid-state or PLC logic controller, with a shut down valve size of 6", a pressure rating of 1500LB, the valve sealing form is a hard seal, and the valve body material is duplex stainless steel, HIPPS safety integrity level (SIL) is required to no less then SIL3.

交货期/服务期/完工期

因此处字数受限，交货期要求见标段/包内容处

交货数量

2套

招标范围

高完整性压力保护系统 Name of Goods: High Integrity Pressure Protection System (HIPPS)

出资比例

详见招标文件

生产能力

详见招标文件

资格要求

（1）资格要求 Requirements for Qualification of BidderA．★营业执照：如果****公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照；如果****公司，****公司登记注册证明。A．★Business licence: The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.B．★制造商要求:所投产品为国内产品：投标人需是逻辑控制器的制造商或取得逻辑控制器制造商唯一授权的成撬商。所投产品为境外产品：允许逻辑控制器的制造商或取得逻辑控制器制造商唯一授权的成撬商或代理商投标。 投标人为代理商或成撬商时，应得到本次投标逻辑控制器制造商的唯一合法授权，并需提供以下材料（盖制造商公章）：1）在有效期内逻辑控制器制造商唯一授权书原件，或该原件的复印件（原件备查，并承诺如中标将在合同签署前提供该原件）；2）HIPPS系统逻辑控制器制造商承诺函，承诺投标****工厂生产。The bid products are domestic products：Bidders must be logic controller of HIPPS’s Manufacturers, or the Skid Makers which is sole authorized by the logic controller of HIPPS’s Manufacturers.The bid products are overseas products: Logic controller of HIPPS’s Manufacturers or Skid Maker or Agent which is sole authorized by the logic controller of HIPPS’s Manufacturers are allowed to bid.If the Bidder is a Skid Maker or Agent，must obtain the sole legal authorization by the logic controller of HIPPS’s Manufacturers in this bid, and shall provide the following documents （stamped with the official seal of the Manufacturer) :1）The original unique authorization letter from logic controller Manufacturer within the validity period，or the copy of the original (the original is for reference, and the Bidder must promise that if the bid is won, the original unique authorization letter will be provided before the contract is signed);2）Commitment letter from the Manufacturer of the HIPPS logic controller, promising that the bidding products will be produced by the Manufacturer's factory.C．★质量体系认证要求:投标人所投逻辑解算器与HIPPS系统内关断阀的制造商应通过ISO9001（或GB/T19001）质量体系认证。投标人须提供制造商有效的质量体系认证证书。C．★Quality Management System Certification requirement: The manufacturer of the HIPPS SDV and logic controller shall pass Quality Management System Certification ISO9001（or GB/T19001）Certification. Bidder shall provide valid Certificate of Quality Management System Certification of manufacturer.D. ★是否接受联合体投标：否。D. ★Joint Venture: Not Accepted.E.未领购招标文件是否可以参加投标:不可以。E.Bid without the bidding documents：NOT Available.（2）资质要求及证明文件Requirements of Qualification of Bidder and Certificate：★HIPPS特种证书要求：投标人所供HIPPS系统中的阀门制造商应取得由****颁发的特种设备生产许可证TS A1及覆盖本次招标范围的由第三方颁发的特种设备型式试验证书，投标人应在投标时提供上述证书的扫描件。★The HIPPS special certificate requirements:The manufacturers of pressure pipeline components such as valves and matching flanges in the HIPPS system provided by the bidder shall obtain the special equipment manufacturing license (TS A1 certificate) awarded by State Administration for Market Regulation and the special equipment type test certificate covering the scope of this bidding awarded by third party,Bidders should provide scanned copies of the aforementioned certificates during the bidding process.（3）★业绩要求Requirement for Bidder's reference:因本处字数受限，业绩要求见标段/包内容处。

招标文件领取时间

2024年11月28日 至 2024年12月05日

招标文件领取方法

在售标截止日期前，在招标公告页面进行购买。

招标文件价格

200.00元

投标文件递交截止时间

2024年12月30日 09时00分

投标地点

所有的投标文件必须在投标文件截止时间前在线提交

投标文件递交方法

在投标截止日期前，按照招标文件要求的投标文件送达地点送交投标文件。

开标时间

2024年12月30日 09时00分

开标地点

中国海油供应链数字化平台

特殊说明

如有不一致，以公告附件中的招标公告为准。

原始公告（点击查看）